Shake-Table Testing of a Full-Scale 10-Story Resilient Mass Timber ...
2024年10月12日 · A glued-in rod detail (i.e., threaded steel rods epoxied into long holes drilled into the end of each wall segment) was designed for this connection similar to a connection that had been used successfully on past projects (Zimmerman et al. 2021).
Fire resistance of a fully concealed, moment-resisting new timber ...
2022年5月1日 · In an experimental study that aimed to investigate the structural behaviour of a new connection configuration that utilizes fully concealed, mechanically fastened steel rods, eight (8) full-size glued-laminated timber beam-end connections were tested under the CAN/ULC-S101 standard time-temperature curve.
Timber Frame Moment Joints with Glued-In Steel Rods. II: …
The behavior of glued-in steel rods in moment-resisting beam-column joints is much more complex because of anisotropy of wood in the connection region, discontinuity of material at the interface, and the possible effects of creep of timber and …
Experimental determination of the pull-out strength of …
2021年8月1日 · This paper presents the results of a new experimental study undertaken to evaluate the behaviour of threaded steel rods embedded into glulam beam sections subjected to direct tension. The embedded rods were mechanically fastened in the end of the glulam beam sections using a nut and square washer.
ABSTRACT: This paper describes an experimental investigation into the use of epoxied steel bar connections in glulam beams. The tests confirm that high strength moment connections can be achieved with threaded steel rods epoxied into the end-grain of …
Timber Frame Moment Joints with Glued-In Steel Rods. I: Design
2012年6月15日 · Significant evidence based on experimental research exists to give designers confidence in the use of theoretical equations to evaluate the pullout strength of threaded steel rods glued into timber. However, the mechanism of load transfer through a timber frame moment joint utilizing glued-in steel rods requires more than simply understanding ...
Ductile moment-resisting connections in glulam beams
This paper describes an experimental investigation into the use of epoxied steel bar connections in glulam beams. The tests confirm that high strength moment connections can be achieved with threaded steel rods epoxied into the end-grain of glulam timber, bolted to steel brackets.
Epoxied Moment-resisting Connections for Timber Buildings
Steel rods epoxied into glue laminated timber have the potential to radically change the design of timber structures. This paper describes the development of epoxied moment-resisting beam-column connections for single storey and multi-storey timber buildings.
Axial glued-in steel timber joints—experimental and ... - Springer
2004年3月3日 · This paper reports the results of an investigation on the behaviour of axially loaded joints utilising glued-in steel rods. A finite element model has been set up, in order to study the most influencing parameters for the shear stress distribution.
Glulam connections using epoxy glued-in rebars - Semantic Scholar
Steel rods epoxied into glue laminated timber have the potential to radically change the design of timber structures. This paper describes the development of epoxied moment-resisting beam-column…