Handwheel does not turn or is tight - Brother USA
Turn the machine off and unplug it. - Take the needle plate off the machine and remove the bobbin case. - Check to see if the handwheel turns freely. - If Yes, re-install the bobbin case and needle plate using the steps in the manual and go to step 4. - If No, continue to the next step. - Confirm that there is no thread jam in the hook area.
Handwheel does not turn or is tight - Brother USA
Handwheel does not turn or is tight. The machine is in a bind and cannot turn freely. Follow these steps to loosen the hand wheel: 1. Turn power switch off position. 2. Remove the needle in the machine. 3. Turn hand wheel toward the back of the machine to …
Handwheel does not turn or is tight - Brother USA
Handwheel does not turn or is tight Remove any broken pieces of the needle that may have fallen down into the shuttle area. If the problem persists, your machine may require service.
Thread the machine - Brother USA
Thread the machine. Follow the instructions below to thread the machine. 1. Raise the presser foot using the presser foot lever. 2. Raise the needle by turning the handwheel toward you (counterclockwise) to raise the thread take-up lever to its highest position. - If the needle is not correctly raised, the sewing machine cannot be threaded.
Change or replace the needle - Video included - Brother USA
Raise the needle using one of the following methods: - Turn the handwheel toward you (counterclockwise) so that the mark on the wheel points up. or. - Press (needle position button) once or twice. 2. Turn off the sewing machine. Before replacing the needle, be sure to turn off the sewing machine, otherwise, injuries may occur if a button is ...
Threading the needles - Video Included - Brother USA
Threading the needles - Video Included. Turn off the machine before threading for safety. - Click here for video instructions. Raise the presser foot lifting lever to raise the presser foot. Turn the handwheel so that the mark on the handwheel <A> is aligned with the line on the machine <B>. When threading the needles after threading the ...
Change or replace the needle - Video included - Brother USA
2. Remove the presser foot. 3. Turn off the sewing machine. Before replacing the needle, be sure to turn off the sewing machine, otherwise, injuries may occur if a button is accidentally pressed, and the machine starts sewing.
Change or replace the needle - Brother USA
Follow the below steps to replace the needle: 1. Turn the main power and light switch to the OFF. 2. Turn the handwheel so that the mark on the handwheel is aligned to the line on the machine. 3. Loosen the corresponding needle set screw with turning the included hexagon driver toward (2) as marked in the image below and remove the needle.
Machine settings - PR1055X - Brother USA
(23) Handwheel Rotate the handwheel to move the needle up and down. Be sure to rotate the handwheel toward the LCD panel. (24) Power supply plug (page 22) (25) Main power switch (page 22) Do not turn the power on soon after turning the power off. It is recommended that you wait 5 seconds before turning the power back on. (26) Ventilation slots
Needle will not move up and down - Brother USA
Needle will not move up and down. If your needle will not move up or down, follow the steps below to resolve this issue: 1. Make sure the foot controller is plugged all the way in on your machine and in the receptacle. 2. Turn the power switch to the on position. 3. Check the foot controller. - Make sure the foot controller is plugged into the ...