epoxy anchor in concrete - concrete, Epoxy anchors - Hilti USA
Hi Hammer, we have several Anchor webinars available under the Learn tab here on Ask Hilti. Please click on the Learn tab and scroll through the webinars to find Anchor 101, it provides the basics of mechanical and adhesive anchoring.
Anchors in Concrete with Epoxy - epoxy adhesive, …
Anchors in Concrete with Epoxy We had a representative from Hilti come by a few months ago and tell us that if we epoxied an anchor (not rebar) into concrete the same depth as a "developed" rebar would be, then we could ignore concrete breakout in tension because the strength was now governed off bar strength and not concrete strength.
Epoxy Anchors in Cracked Concrete - Crack Size
Hi Chad, With consideration for the protection of the reinforcing steel, crack widths, per ACI 318 and CSA A23.3 are assumed to be less than approximately 0.02” (0.5 mm) for seismic loading and approximately 0.012” (0.3 mm) for other cases.
Anchor for cracked concrete - Cracked Concrete, Epoxy anchors,.
I need anchors good for 2.6 kips/bolt tension (ultimate) preferably with a 6'' spacing. The concrete is a 4'' slab 3000 psi (cracked concrete)?
1/4 epoxy anchors - Marble, 1/4 epoxy - Hilti USA
I need to anchor to marble with a 1/4 concrete anchor i want to use epoxy and threaded rod, do you have a product that can do this 1/4 epoxy anchors - Marble, 1/4 epoxy - Hilti USA Log in or register Cart
Number of Cartridges required for epoxy anchors - concrete, Ca.
I would like to know how many cartridges I will need of the HIT=HY-200R.V3 Epoxy. I will be drilling into concrete a 1-1/8 DIA. with 3-1/2 embedment. There are a total of 840.0 anchors to be drilled, the anchor itself is 1 DIA.
Epoxy Anchors - epoxy adhesive, reinforcement bars hole diam...
What type of epoxy, hole diameters and depths would you recommend for developing the full tensile strengths of standard reinforcement bars, #4, #5 and #6 in 3000 psi concrete? epoxy adhesive, reinforcement bars hole diameter & depth
Anchors in rock - Structural Design, rock anchors - Hilti USA
Can the Hilti adhesive or epoxy anchors be used in rock and are the design charts for uncracked concrete applicable? Structural Design, rock anchors 0 Likes 1 Reply
Epoxy anchors failed pull test - EPOXY, failure - Hilti USA
If an epoxy anchors fails the pull test can I simply pull the anchor out, redrill drill the holes and epoxy a new anchor into the same hole? EPOXY, failure 0 Likes 1 Reply
Epoxy product name - Epoxy concrete, epoxy solution - Hilti US
Slow cure adhesive anchors like HIT-RE 500 V3 are epoxy anchors characterized by longer working times. Slow cure adhesive anchors are generally more appropriate for large diameter bars in combination with deeper hole depths. For additional assistance, please reach out to [email protected] or give us a call at 877-749-6337. Regards ...